Call Features
Flyingvoice Network Technology Co., Ltd. 19
You can transfer a call to another contact immediately without consulting with her/him first.
Procedure
1. Press the TRAN key or Transfer (Trans) during a call.
2. Do one of the following:
⚫ Enter the number or select a contact from the placed call list you want to transfer to.
⚫ If you have set a Speed Dial key, you can also press the Speed Dial key to transfer the
call to the contact directly.
⚫ Press Directory (Dir). Select the desired contact from the Directory list.
3. Press TRAN key to complete the transfer.
TIP: If you are using a handset, the transfer can be completed by hanging up the handset.
Performing Transfer with a Transfer Key
By default, you can transfer a call to a specific contact directly using a Transfer key during a
call.
Your system administrator can also set your phone to perform attended transfer when using
a Transfer key.
Performing a Blind Transfer Using a Transfer Key
After you have set a Transfer key with a specific contact, you can perform a blind transfer by
using it.
Before You Begin
Confirm with your system administrator that the transfer mode has set to perform a blind
transfer.
Procedure
1. Press the Transfer key during a call.
The call is transferred to the specific contact directly.
Conference Calls
The phone supports a three-way local conference and multi-way network conference. During
the conference, follow these tips:
⚫ Use the handset or a headset if you're in an open environment.
⚫ Mute your microphone when you are not speaking, especially in noisy environments.
⚫ Avoid tapping or rustling papers near the microphone.
⚫ Speak in your normal voice without shouting.
Note Check with your system administrator to find out if the local conference is enabled on
your phone.
Topics
Setting Up a Local Conference Call
Holding or Resuming a Conference Call
Splitting a Conference Call
Ending a Conference Call
To Next Page
Loading...
