What to do if my Flymo EasiLife GO says 'Wrong PIN code'?
If your Flymo Lawn Mower is showing 'Wrong PIN code', it means an incorrect PIN has been entered. Enter the correct PIN code. If you've forgotten the PIN code, contact Flymo service for assistance.
What to do if my Flymo EasiLife GO gets 'Trapped'?
If your Flymo Lawn Mower is 'Trapped', it's likely because it's encountering multiple obstacles in a confined space. Remove these obstacles, or create an island around them using the boundary wire.
What causes 'Wheel motor overloaded' on my Flymo EasiLife GO Lawn Mower and how to fix it?
If your Flymo Lawn Mower displays 'Wheel motor overloaded, left/right', it's likely due to grass or another object obstructing the drive wheel. Remove any grass or object from the drive wheel.
How to fix 'Wheel motor blocked' on my Flymo EasiLife GO?
If your Flymo Lawn Mower displays 'Wheel motor blocked, left/right', it's likely due to grass or another object obstructing the drive wheel. Remove any grass or objects you find.
What to do if the Flymo EasiLife GO cutting system is blocked?
If your Flymo Lawn Mower cutting system is blocked, it's likely due to grass or another object obstructing the blade disc. Remove any obstructions you find. If the blade disc is submerged in water, relocate the product and prevent water accumulation in the work area. Also, if the grass is too high, cut it before using the product, ensuring it is no more than 4 cm / 1.6 in.
Why is my Flymo EasiLife GO Lawn Mower going 'Outside working area'?
If your Flymo Lawn Mower is 'Outside working area', it could be due to a few reasons. One possibility is that a section of the boundary wire is crossing another section near the charging station; ensure the boundary wire is correctly connected. Another cause might be the boundary wire being too close to the work area's edge; make sure it's properly installed. Interference from nearby metal objects like fences or buried cables can also lead to this problem, so try moving the boundary wire. Finally, interference with a loop signal from another product installation nearby could be the cause; try putting the product in the charging station and generating a new loop signal.
General| Model | EasiLife GO |
|---|---|
| Category | Lawn Mower |
| Type | Robotic |
| Cutting Width | 16 cm |
| Cutting Height Range | 20-50 mm |
| Battery Type | Lithium-Ion |
| Battery Voltage | 18 V |
| Battery Capacity | 2.0 Ah |
| Area Capacity | 400 m² |
Details on product description, support, charging station, and Flymo app usage.
Explains the robotic mower's mowing technique and control via the Flymo EasiLife app.
Diagram and identification of all parts of the robotic lawn mower.
Explanation of manual symbols, battery symbols, and keypad button functions.
Illustrates and explains the meaning of LED status lights on the mower's keypad.
Essential safety precautions for operating the robotic lawn mower.
Explains safety symbols and provides instructions for safe operation.
Warnings and precautions regarding the product's battery.
Guidance on safely lifting the product and precautions during thunderstorms.
Safety warnings for maintenance and thunderstorm-related electrical safety.
Overview of installation, components, and general preparations.
Guidelines for positioning the charging station and power supply.
Instructions and considerations for installing the boundary wire.
Specific instructions for wire placement on slopes, in passages, and for islands.
Setting up secondary areas and positioning the guide wire.
Tools needed for installation and steps to install the charging station.
Detailed steps for connecting boundary and guide wires to the charging station.
Methods for fixing wires with stakes, burying them, or extending them.
Visual check of charging station and initial product settings.
Connecting the Flymo app and setting up mowing schedules.
Features like Lawn Coverage, PassageSense, and LawnSense.
Settings for collision avoidance, ECO mode, frost detection, loop signal, and PIN code.
Instructions for turning the mower on/off and understanding indicator lights.
Steps to start the mower and overview of available operating modes.
Setting the mower to operate in the main area with or without a daily schedule.
How to operate in secondary areas and use the park mode.
Using park/schedule, overriding schedules, and spot cutting functions.
Procedures for stopping, switching off, and charging the product.
Instructions on how to adjust the grass cutting height.
Step-by-step guide for adjusting the cutting height, including safety.
Overview of maintenance, cleaning the product, wheels, body, and charging station.
Instructions for cleaning the chassis and inspecting the blade disc.
Step-by-step guide for replacing the mower blades safely.
Instructions on how to update the product's firmware.
Updating the Flymo EasiLife app and important battery information.
Steps to replace the battery and recommendations for winter service.
Guide to finding information and help for product faults and symptoms.
Table detailing fault messages, their causes, and recommended actions.
Explanation of informational and warning messages displayed via the app.
Interpreting the indicator lamp signals on the charging station for troubleshooting.
Common product symptoms, their causes, and suggested solutions.
Steps to locate and repair breaks in the boundary loop wire.
Regulations and requirements for transporting the product, especially the battery.
Recommendations for storing the product and charging station.
Guidelines for the correct disposal of the product and battery.
Detailed specifications including dimensions, electrical system, and sound data.
Data on mowing system, cutting, passages, slopes, and IP classification.
Information on registered trademarks associated with the product.
Details on the product's warranty coverage, duration, and exclusions.
Manufacturer's declaration of compliance with relevant EU directives and standards.
To Next Page
