2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > General >
Country.
3. Use the arrow buttons to select country and then
push the BACK button.
3.10.14.4 To set the unit format
1. Do steps 1–3 in
To get access to the menu on
page 21
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > General >
Unit format.
3. Use the arrow buttons to select unit format and
then push the BACK button.
3.10.14.5 To reset all user settings
1. Do steps 1–3 in
To get access to the menu on
page 21
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Settings > General >
Reset all user settings
.
3. Use the right arrow button to select
Proceed with
reset of all user settings?
4. Push the OK button to reset all the user settings.
Note:
Security level, PIN code, Loop signal,
Messages, Date & Time, Language
and
Country
settings
are not reset.
3.10.14.6 The About menu
The
About
menu displays information about the product,
for example serial number and firmware versions.
1392 - 007 -
Installation - 27
To Next Page
Loading...
