Need help?Do you have a question about the FlySky HRZ00020 and is the answer not in the manual?
General| Antenna Length | 26mm |
|---|---|
| Modulation | GFSK |
| RF Power | ≤20dBm |
| DSC Port | Yes |
| Certification | CE, FCC |
Details safety symbols and their meanings to prevent damage, injury, or death.
Provides essential guidelines for safe operation, including prohibited actions and conditions.
Visual guide and labels for all components of the transmitter unit.
Details the components and interfaces of the receiver unit.
Instructions and safety precautions for installing AA batteries into the transmitter.
Step-by-step guide on how to properly power on the transmitter and receiver system.
Explanation of buzzer sounds and LED indicators for system status and feedback.
Procedure for binding the transmitter and receiver, including factory default status.
Procedure for calibrating the steering wheel and throttle trigger neutral positions.
Instructions on how to safely power off the transmitter and receiver system.
Details the assignment and functionality of the 4 output channels of the transmitter.
Explains channel reverse, trim adjustments, and Dual Rate (D/R) settings for servo volume control.
Details the failsafe function to prevent unexpected behavior upon signal loss.
Important precautions for installing and operating the HRZ00017 receiver.
Instructions on connecting related equipment like motors, servos, and ESCs.
Procedure for re-binding the receiver to the transmitter if needed.
Details low voltage and overheat protection functions of the receiver.
Explains the failsafe function for safety when signal is lost.
Technical specifications for the Flysky HRZ00020 transmitter.
Technical specifications for the Flysky HRZ00017 receiver.
Declaration of conformity for the radio equipment with RED 2014/53/EU.
Warning regarding antenna placement and RF exposure compliance for CE marking.
FCC statement regarding compliance, interference, and operating conditions.
Guidelines for the proper disposal of old electrical appliances and batteries.
Statement regarding compliance with Industry Canada's licence-exempt RSS(s).
To Next Page
