Need help?Do you have a question about the FlySky Paladin PL18 EV and is the answer not in the manual?
General| Frequency | 2.4GHz |
|---|---|
| Channels | 18 |
| Modulation | AFHDS 3 |
| Telemetry | Yes |
| Resolution | 4096 |
| Low Voltage Alarm | Yes |
| Charging Interface | USB-C |
| Online Update | Yes |
| RF Band | 2.4GHz |
| Charging Port | USB-C |
| Voice Alerts | Yes |
| Wireless Trainer | Yes |
| Model Type | Helicopter, Glider, Multirotor |
| Operating Current | Approx. 300mA |
| Compatible Receivers | AFHDS 3 receivers |
Explains safety icons and their meanings.
Provides essential safety guidelines for operation.
Lists critical dangers and warnings for battery handling.
Details the AFHDS3 system capabilities and advantages.
Identifies front/back view components and physical controls.
Covers reset button, antenna, status indicator, power, and charging.
Guides on adjusting gimbal stick tension and centering.
Describes antenna care, status indicators, and ports.
Guidelines for proper receiver and servo mounting.
Steps for system power-on and transmitter-receiver binding.
Describes main interface elements and menu navigation.
Shows servo output values and performs channel tests.
Reassigns controls and trims to transmitter channels.
Covers model naming, switching, structure, and combinations.
Configures receiver settings including bind, protocol, and failsafe.
Manages sensor data display, selection, alarms, and calibration.
Reverses the direction of servo movement for a channel.
Adjusts servo travel range and limits.
Fine-tunes the center point of each channel.
Configures different operational modes and their settings.
Views and adjusts trim values for channels.
Sets servo volume change curves for channels.
Enables and configures Dual Rate for channels.
Adjusts the overall offset for channel data.
Reduces servo speed by adding delay.
Creates complex control combinations using Master/Slave.
Controls left and right tracks simultaneously.
Enhances braking performance with pulse braking.
Sets up and manages timers for model operation.
Adjusts the throttle channel's output curve.
Configures logic gates for switch combinations.
Manages RF settings including transmit, type, alarms, and firmware.
Configures language, units, sound, vibration, backlight, power, and interface.
Covers control calibration, factory reset, and transmitter firmware updates.
Accesses user manuals and support contact information.
Lists detailed technical specifications for the transmitter.
Lists detailed technical specifications for the receiver.
Details all items included in the product package.
Official statement of product compliance.
Warning regarding antenna placement and RF exposure compliance.
FCC compliance information and user guidance.
Instructions for proper disposal of electrical appliances.
To Next Page
