Flyzone Seawind - Assemble the Model; Install the Main Landing Gear; Install the Horizontal Stabilizer

3
Academy of Model Aeronautics
If you are not already a member of the AMA, please join!
The AMA is the governing body of model aviation and
membership provides liability insurance coverage, protects
modelers’ rights and interests and is required to  y at
most R/C sites.
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302-9252
Tele. (800) 435-9262
Fax (765) 741-0057
Or via the Internet at: http://www.modelaircraft.org
ASSEMBLE THE MODEL
Install the Main Landing Gear
❑
1. Note that the main landing gear has an ‘L’ and an ‘R’
on the left and right gear.
❑
2. Remove the M2.5 x 10mm machine screws.
❑
3. Attach the main landing gear to the aluminum pivot.
❑
4. Connect the arms.
❑
5. Install the main landing gear on the other side.
Install the Horizontal Stabilizer
❑
1. Insert the tabs into the  n.