To Next PageTo Next Page
Need help?Do you have a question about the FMA Direct Co-Pilot FS8 and is the answer not in the manual?
Description of the product's features and capabilities.
Details on the integrated receiver functionalities and technologies.
Explains the flight stabilization system and its operation.
Lists additional system capabilities and compatibility.
Explains how the failsafe mode works and its parameters.
Describes methods to control the stabilization system via transmitter.
Technical details and operating parameters of the device.
Essential safety guidelines for operating radio controlled models.
Specific safety advice related to the stabilization feature.
Itemized list of components included in the package.
List of optional accessories available for purchase.
External items required for installation or operation.
Initial steps and prerequisites before installation.
General guidance on sensor placement.
Detailed steps for mounting the sensor on an airplane.
Detailed steps for mounting the sensor on a helicopter.
Instructions for installing the vertical orientation sensor.
Steps for installing the user interface module.
Specific mounting instructions for helicopter module.
Wiring instructions for connecting all parts.
Important notes for specific aircraft types or engines.
Guide to configuring the failsafe system and its parameters.
Explanation of different operating modes for the receiver.
Steps to define failsafe channel assignments and servo positions.
Details setting servo positions for failsafe.
Provides starting points for failsafe settings.
Additional options and functions within Receiver Setup Mode.
Process for assigning channels to control stabilization.
Description of the different flight stabilization operational modes.
Basic understanding of aircraft axes and control inputs.
Specific steps for setting up the pitch control channel.
Specific steps for setting up the roll control channel.
Steps for assigning a channel to control stabilization remotely.
How to confirm the stabilization system is working correctly.
Configuration for automatic trim adjustment.
Background information on the infrared calibration process.
Procedure for calibrating the system to the environment.
Guidelines for safe and effective calibration.
Explanation of the infrared calibration process.
Step-by-step instructions for performing calibration.
Routine checks before flight.
Procedure to check for radio interference.
Method to verify the receiver's battery status.
Steps to test the radio system's operational range.
Verifying the pitch control system response.
Verifying the roll control system response.
Ensuring control surfaces are centered.
How to manage stabilization during flight.
Verifying sensor connections and functionality.
Handling inverted flight scenarios and vertical sensor use.
Procedures for signal loss events and failsafe activation.
Advice on adjusting aircraft trim for optimal performance.
Overall advice for flying with the system.
Specific flying techniques for standard airplanes.
Techniques for flying wing aircraft.
Steps to turn off the stabilization feature.
Specific flying techniques for helicopters.
Detailed procedure for checking radio system range.
Common problems and their solutions.
FAQs covering general product queries.
FAQs related to system setup procedures.
FAQs concerning flight operations.
Concise steps for failsafe setup.
Concise steps for stabilization setup.
Overview of button functions and their effects.
Checklist for performing infrared calibration.
Checklist for preflight operations.
Checklist for normal operating mode checks.
General| Brand | FMA Direct |
|---|---|
| Model | Co-Pilot FS8 |
| Category | Receiver |
| Language | English |
