16
Issue/Rev. 0.6 (2/06)
7. Set how many decimal positions you want in
the flow rate display.
8. Set how many decimal positions you want in
the total display.
000000 = no decimal positions
00000.1 = one decimal position
0000.02 = two decimal positions
000.003 = three decimal positions
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = increments amount of decimal positions
“-” = decrements amount of decimal positions
“Reset” = replaces default
9. Set the time scale in which that the flow rate
will be displayed on the display.
SEc = unit of volume per second
60 SEc = unit of volume per minute
PEr hr = unit of volume per hour
24 hr. = unit of volume per day
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = increments unit of time scale
“-” = decrements unit of time scale
“Reset” = replaces default
10. Select “on” for a scaled pulse output. Select
“oFF” if a scaled pulse output is not desired (go
to Step 13
).
Button action:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = toggle between “oFF” and “on”
“-” = toggle between “oFF” and “on”
“Reset” = replaces default
11. Set the scale of the scaled pulse output.
_____1 = 1 pulse per 1 increment of least significant
digit in total LCD
____10 = 1 pulse per 10 increment of least significant
digit on total LCD
___100 = 1 pulse per 100 increment of least significant
digit on total LCD
__1000 = 1 pulse per 1000 increment of least significant
digit on total LCD
_10000 = 1 pulse per 10000 increment of least signifi-
cant digit on total LCD
100000 = 1 pulse per 100000 increment of least signifi-
cant digit on total LCD
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = increments scale of pulse output
“-” = decrements scale of pulse output
“Reset” = replaces default
12. This option is not operable or available for the
battery powered 4200. Verify that “oFF” is dis-
played. To select “oFF” push the “+” or “-” key and
go to Step 13.
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = toggle between “oFF” and “on”
“-” = toggle between “oFF” and “on”
“Reset” = replaces default
000000 = no decimal positions
00000.1 = one decimal position
0000.02 = two decimal positions
000.003 = three decimal positions
0000-.1 = flow rate x 10
0000.-2 = flow rate x 100
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = increments amount of decimal positions
“-” = decrements amount of decimal positions
“Reset” = replaces default
7. Set how many decimal positions you want in
the flow rate display.
8. Set how many decimal positions you want in
the total display.
000000 = no decimal positions
00000.1 = one decimal position
0000.02 = two decimal positions
000.003 = three decimal positions
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = increments amount of decimal positions
“-” = decrements amount of decimal positions
“Reset” = replaces default
9. Set the time scale in which that the flow rate
will be displayed on the display.
SEc = unit of volume per second
60 SEc = unit of volume per minute
PEr hr = unit of volume per hour
24 hr. = unit of volume per day
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = increments unit of time scale
“-” = decrements unit of time scale
“Reset” = replaces default
10. Select “on” for a scaled pulse output. Select
“oFF” if a scaled pulse output is not desired (go
to Step 13
).
Button action:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = toggle between “oFF” and “on”
“-” = toggle between “oFF” and “on”
“Reset” = replaces default
11. Set the scale of the scaled pulse output.
_____1 = 1 pulse per 1 increment of least significant
digit in total LCD
____10 = 1 pulse per 10 increment of least significant
digit on total LCD
___100 = 1 pulse per 100 increment of least significant
digit on total LCD
__1000 = 1 pulse per 1000 increment of least significant
digit on total LCD
_10000 = 1 pulse per 10000 increment of least signifi-
cant digit on total LCD
100000 = 1 pulse per 100000 increment of least signifi-
cant digit on total LCD
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = increments scale of pulse output
“-” = decrements scale of pulse output
“Reset” = replaces default
12. This option is not operable or available for the
battery powered 4200. Verify that “oFF” is dis-
played. To select “oFF” push the “+” or “-” key and
go to Step 13.
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = toggle between “oFF” and “on”
“-” = toggle between “oFF” and “on”
“Reset” = replaces default
000000 = no decimal positions
00000.1 = one decimal position
0000.02 = two decimal positions
000.003 = three decimal positions
0000-.1 = flow rate x 10
0000.-2 = flow rate x 100
Button operation:
“Program” = progress to next screen
“Enter/Next” = progress to next screen
“K-factor” = no action
“+” = increments amount of decimal positions
“-” = decrements amount of decimal positions
“Reset” = replaces default
To Next Page
Loading...
