FMC Technologies MPU B Series User Manual

MPU Series B
Ultrasonic Gas Flow Meter
______________________________________________________________________
_____________________________________________________________________
PRD-0000022543 Rev. 00D Page 27 of 28
MNKS008 0.0 (4/08)
6.1.4. Status Return Codes
The functions implemented in DLL return a single status code upon
return. The code is returned as a 64-bit integer.
The table below shows the valid return values.
Return
Code
Description
0 The function call succeeded
1 The function call failed
2 The connection attempt to the MPU Series B failed
3 The specified database address was invalid
6.2. MPU Series B WinScreen
The MPU Series B WinScreen is a stand-alone application for
communicating with the MPU Series B. It can be used with both
the TCP/IP and the serial ModBus interface. Refer to
PRD-0000020565 “User Manual, MPU Series B” for more details.

FMC Technologies MPU B Series Specifications

General

Brand	FMC Technologies
Model	MPU B Series
Category	Measuring Instruments
Language	English