Need help?Do you have a question about the FMS RocHobby Super Viper 70MM and is the answer not in the manual?
General| Recommended Receiver | 6 Channel (not included) |
|---|---|
| Material | Durable EPO |
| Skill Level | Intermediate |
| Servos | 9g Digital Metal Gear Servo |
| Radio | 6 Channel |
| Ducted Fan Size | 70mm |
| Battery | 6S 3300mAh-4000mAh (Not Included) |
| Control System | Aileron, Elevator, Rudder, Throttle |
| ESC | 80A |
General safety guidelines and precautions for operating the RC model, including age recommendation and environmental factors.
Highlights of the model's main features, including ESC, motor, construction, and control system.
Instructions for attaching the main wing to the fuselage, including wiring connections.
Procedure for installing the horizontal tail section, including servo connections and securing.
Steps for attaching the vertical tail fin, connecting rudder servos, and securing with screws.
Guide for installing optional flaps, including cutting, servo mounting, and linkage setup.
Instructions for battery installation and connecting servos and ESC to the receiver.
Key ESC information, transmitter binding, and model setup procedures.
Recommended dual rate settings for elevator, aileron, and rudder for optimal flight control.
Guide to installing clevises on control rods and adjusting control horns for proper surface movement.
Procedure for balancing the model correctly by adjusting battery position for optimal flight stability.
Guidelines for choosing a safe and appropriate location for flying the RC model.
Performing radio range tests and monitoring flight time for safe operation.
Instructions for takeoff, general flying, and landing procedures.
Tips for repairing foam damage and ensuring mechanical components are secure.
Common issues related to motor, controls, and power with their possible causes and solutions.
Detailed information on ESC wiring, model specifications, features, and user programming.
Explanation of adjustable ESC settings like brake, battery type, timing, and acceleration.
Detailed explanation of ESC timing, acceleration, governor mode, motor rotation, switching frequency, and low voltage cutoff.
Guide to automatic throttle calibration, normal startup, and entering the ESC programming mode.
Explanation of ESC safety functions, initial power-up, calibration, startup procedures, and programming mode.
Further troubleshooting for motor issues, signal loss, overheating, and power problems related to the ESC.
To Next Page
