3 PSU 0127- 7003313-16-19-20 15-04-2019
1 Introduction
FOAMICO congratulates you with your new FOAMICO Cleaning system. The PSU 0127-1-9 series is
developed to be used for professional cleaning purpose.
The system is manufactured mainly of high-grade stainless steel. It is designed to meet today’s high hygiene
standards
Attention! To use and operate the system this manual must be read carefully.
Condition of liability
The responsibility for the treatment and operation in an appropriate manner rests with each individual user.
Thus it is of great importance that this manual is available to the sanitary employee at any time.
Guarantee conditions
For a period of 12 months from the date of delivery your dealer warrants for parts which don’t function due
to defects of material or production. This guarantee does not cover wearing parts (as described in the section
about spare parts). This guarantee is covering the replacement or repair of the defect part. Any dismounting,
forwarding, and mounting expenses are paid by the purchaser. The costs for any possible return from
FOAMICO after finished repairs rest with FOAMICO. The defect parts are the property of FOAMICO.
Claims which might be raised for any other legal reason, or normal wear and tear, as well as damage on parts
which can be related to negligent or wrong treatment, are not covered by this guarantee. This guarantee does
not cover at all, if the system has been exposed to frost.
This guarantee becomes void if changes or repairs have been implemented by non-authorized persons. Any
claims under the guarantee will only be accepted if they are announced to FOAMICO immediately after the
damage has been observed. This guarantee becomes void as soon as the system changes ownership.
Dealers and FOAMICO cannot be held responsible for personal injuries, damages to equipment, loss of
earning including those caused by production loss, loss of stock or the like, which might arise from
inappropriate or delayed delivery of the sold product, regardless the reason, including defects in production
or material. In addition, please read our usual terms of sale and delivery
Protection against frost
The equipment should only be installed in frost free rooms.
Prior to being exposed to frost, the system must be emptied for water (frost protected). Even shorter periods
of exposure to frost can damage the equipment.
This symbol refers to safety and danger moments. Neglect of these instructions can cause damage on persons
and objects.
Safekeeping
You are requested to store this manual in a place where it is at your disposal at any time, and it
should be handed over to the person responsible for this product. Should the manual get lost, please
don’t hesitate to require another one from your agent
To Next Page
Loading...
Need help?
General