To Next PageTo Next PageWhat to do if the Focal Speaker System remote control is not working?
If the remote control for your Focal Speaker System is not working, consider the following: * Ensure that the Dimension is within reach of the remote control and that the angle is not too extreme. The remote control has a reach of approximately 7 meters and a maximum angle of 20°. * The battery in your remote control may be low. Try replacing the battery.
Why is there no sound from Focal Speaker System when using Audio Return Channel?
If your TV has the Audio Return Channel function but there is no sound when Dimension’s TV input is selected on your Focal Speaker System: * The Audio Return Channel function on your TV may be deactivated. Refer to your TV’s user manual and enable the TV’s Audio Return Channel function. * The HDMI™ cable may not be connected correctly, or there may be a fault with the cable. Check the connections and try another HDMI™ cable.
How to synchronize audio and video on Focal Speaker System?
If the audio and video are not synchronized on your Focal Speaker System, it might be because your TV is not equipped with an automatic synchronization function. Try using Dimension’s manual "SYNC" function.
What to do if no sound is coming from Dimension Sub subwoofer of Focal Speaker System?
If no sound is coming from your Dimension Sub subwoofer with your Focal Speaker System: * Check that the cable is connected correctly. * Verify that the "SUBWOOFER" selector is set to 11 - "DIMENSION SUBWOOFER OUT".
Why is there no sound from the subwoofer connected to SUB LINE OUT of Focal Speaker System?
If there is no sound from the subwoofer connected to the SUB LINE OUT output on your Focal Speaker System: * Ensure the cable is connected correctly. * Check that the "SUBWOOFER" selector is set to 12 - SUB LINE OUT. * Confirm that your active subwoofer is working correctly and is not set to OFF or Standby.
How to fix CEC issues with Focal Speaker System via HDMI?
If the CEC via the HDMI™ connections are not working correctly on your Focal Speaker System, the CEC command via HDMI™ may be deactivated on your audio-video devices. Enable this function on the audio-video devices connected to Dimension.
What does it mean when the Standby button is flashing and the volume + button is lit on my Focal Speaker System?
If no sound is coming from your Focal Speaker System Dimension, the Standby button is flashing, and the volume + button is lit, the overheating protection has been activated due to excessive amplifier temperature. Unplug the system, wait for an hour until it cools down, then turn Dimension back on.
Why is there no sound and the HDMI button is lit on my Focal Speaker System?
If no sound is coming from your Focal Speaker System Dimension, the Standby button is flashing, and the HDMI™ TV button is lit, the overheating protection has been activated due to overcurrent. Unplug the system, wait for an hour until it cools down, then turn Dimension back on.
General| Audio decoders | - |
|---|---|
| RMS rated power | 450 W |
| Audio output channels | 5.1 channels |
| Subwoofer included | Yes |
| Subwoofer frequency range | 30 - 110 Hz |
| Product color | Black |
| Apple docking compatibility | Not supported |
| Soundbar dimensions (WxDxH) | 1155 x 115 x 115 mm |
| Subwoofer dimensions (WxDxH) | 1155 x 325 x 115 mm |
| Digital audio optical out | 1 |
Weight and Dimensions| Soundbar weight | 5500 g |
|---|---|
| Subwoofer weight | 14000 g |
