EasyManuals Logo

Focusrite ISA TWO User Manual

Focusrite ISA TWO
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
English
SPECIFICATIONS
Performance Specifications
Maximum Input and Output Levels
Maximum Output Level
+24 dBu with a THD+N < 0.01% at 1kHz measured with 0 dBu input
level, with 150 Ω source impedance and 22Hz/22kHz band-pass
filter
Maximum Microphone
Transformer Input Level
+7 dBu with a THD+N < 0.7% at 1kHz measured at 0 dB of gain with
150 Ω source impedance and 22Hz/22kHz band-pass filter
Mic Input Response
Gain range
0 dB to +60 dB in 10 dB steps, plus 0 dB to +20 dB continuously
variable trim
Input Impedance
Switched Impedance setting
Equivalent Input Impedance at 1 kHz
Low = 600 Ω
ISA 110 = 1.4 kΩ
Med = 2.4 kΩ
High = 6.8 kΩ
EIN
(Equivalent Input Noise)
Measured at 60 dB of gain with 150 Ω
source impedance and 22 Hz-22 kHz
band pass filter
-127 dB
Noise
Noise at output with unity gain (0 dB)
and 22 Hz-22 kHz band pass filter
-97 dBu
Signal-to-Noise Ratio
Measured with 150 Ω source impedance
and 22 Hz-22 kHz band pass filter
121 dB relative to max
output +24 dBu
Total Harmonic Distortion
+ Noise
Measured with a -20 dBu input signal at
+30 dB of gain and with a 22 Hz-22 kHz
band pass filter
< 0.0007% at 1 kHz

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Focusrite ISA TWO and is the answer not in the manual?

Focusrite ISA TWO Specifications

General IconGeneral
BrandFocusrite
ModelISA TWO
CategoryAmplifier
LanguageEnglish

Related product manuals