Focusrite Saffire PRO 26 - Saffire PRO 26 Specifications; MIC Specifications; LINE Specifications; INSTRUMENT Specifications

32
Saffire PRO 26 Specifications
MIC
• Frequency Response: 20 Hz to 20 kHz +/- 0.1 dB (at min. gain)
• THD+N: -98 dB (rel -1 dBFS input, min. gain, 20 kHz bandwidth)
• Noise: EIN <-124 dBu (max. gain with 150 ohm termination, CCIR-RMS weighting)
LINE
• Frequency Response: 20 Hz to 20 kHz +/- 0.1 dB (at min. gain)
• THD+N: -88 dB (rel -1 dBFS input, min. gain, 20 kHz bandwidth)
• Noise: EIN <-83 dBu (Chs 1 & 2); EIN <-94 dBu (Chs 3-6) (max. gain, 50 ohm termination, CCIR-RMS weighted)
INSTRUMENT
• Frequency Response: 20 Hz to 20 kHz +/- 0.02 dB (at min. gain)
• THD+N: -92 dB (rel -1 dBFS input, min. gain, 20 kHz bandwidth)
• Noise: EIN <-97 dBu (max. gain with 600 ohm termination, CCIR-RMS weighting)
DIGITAL PERFORMANCE
• Clock Sources:
• Internal clock.
• Sync to word clock on S/PDIF (coaxial input)
• Sync to word clock on ADAT input
• Sync to word clock on optical S/PDIF input (when enabled)
• JetPLL™ PLL technology providing superb jitter reduction, for class-leading converter performance
• Sample rate clock accuracy: 4.5 ppm
• Sample rates: 44.1 to 96 kHz
• 18 input channels to computer: Analogue (6), S/PDIF (2), ADAT (8) and Mix Loop-back (2)
• 8 output channels from computer: Analogue (6) and S/PDIF (2)
• Fully assignable 18 input, 6 output mixer
WEIGHT and DIMS
• 3 kg
• 35 cm x 4.5 cm x 26.5 cm
ANALOGUE INPUTS
• Chs 1 & 2: Mic (rear XLR) or Line/Instrument (front TRS)
• Chs 3 & 4: Mic/Line inputs on rear Combo connectors, auto-switching between XLR and TRS
• Chs 5 & 6: Line inputs (rear TRS)
• Mic gain range: 50 dB
• Line 1-6 gain range: -50 dB
• Instrument gain range: 50 dB
• Input Pad on inputs 1 & 2: 8 dB
• Phantom power switched in 2 channel groups on Mic. 1-4
• Mic and instrument maximum input level: +8.5 dBu (+16.6 dBu (mic)/+12.8 dBu (inst) with pad on inputs 1 and 2)
• Line maximum input level: >+28 dBu