Need help?Do you have a question about the Focusrite Scarlett 4i4 4th Gen and is the answer not in the manual?
General| Connectivity | USB-C |
|---|---|
| Bit Depth | 24-bit |
| MIDI I/O | Yes |
| Number of Preamps | 2 |
| Phantom Power | Yes (48V) |
| Sample Rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
| Included Software | Ableton Live Lite |
| Inputs | 2 x XLR-1/4" Combo, 2 x 1/4" Line |
| Outputs | 2 x 1/4" TRS, 1 x 1/4" Headphone |
Detailed instructions for installing the Focusrite Control 2 software.
Guide to adjusting input gain levels for optimal recording quality and avoiding clipping.
Explains how input signal levels are displayed on the device's gain halos.
Describes how signal levels are monitored within the Focusrite Control 2 software.
Details on enabling and using 48V phantom power for microphones.
How to switch the 1/4" input between instrument and line level.
Step-by-step guide to using Auto Gain for automatic level setting.
How Clip Safe automatically adjusts gain to prevent clipping.
Step-by-step guide for setting up audio device and driver in Ableton Live (Mac).
How to set up audio tracks, input sources, and monitoring for recording.
Steps to set up audio device and inputs in Logic Pro and GarageBand.
Steps for setting up the playback engine and creating audio tracks in Pro Tools.
Step-by-step guide to setting up audio device and tracks in Reaper (Mac).
Steps for setting up audio device and routing inputs in FL Studio.
Steps for setting up the audio system and adding tracks in Cubase (Mac).
Instructions for updating the Focusrite Control 2 application.
Step-by-step guide to update the Scarlett 4i4's internal firmware.
To Next Page