Need help?Do you have a question about the Focusrite Scarlett 18i6 and is the answer not in the manual?
General| Inputs | 8 |
|---|---|
| Analogue Inputs | 6 |
| Outputs | 6 |
| Analogue Outputs | 6 |
| Phantom Power | Yes |
| Sample Rate | 192 kHz |
| Sample Rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
| Latency | Low Latency |
| MIDI I/O | Yes |
| Headphone Outputs | 2 |
| Type | USB Audio Interface |
| Output Channels | 6 |
| Bit Depth | 24-bit |
| Preamps | 2 |
| USB | USB 2.0 |
| Microphone Inputs | 2 |
Detailed description of the input and output connectors located on the rear panel of the Scarlett 18i6.
Explanation of the input connectors, gain controls, and monitoring controls on the Scarlett 18i6 front panel.
Step-by-step instructions for installing the Scarlett 18i6 drivers and software on Windows and Mac.
Guidance on configuring the Scarlett 18i6 within your Digital Audio Workstation (DAW) for audio input and output.
Overview of the software mixer, including input channels, routing, and output controls.
Details on controlling monitor and headphone output levels and configurations within Scarlett MixControl.
How to route audio sources (inputs, DAW, mixes) to physical outputs using dropdown menus.
Application of the 'Zero Latency Tracking' preset for monitoring inputs with minimal delay.
How monitor control buttons indicate which outputs are managed by the monitor section.
Function of the main monitor level knob for adjusting output levels of assigned outputs.
To Next Page