Need help?Do you have a question about the Focusrite Scarlett 2i2 4th Gen and is the answer not in the manual?
General| Bit Depth | 24-bit |
|---|---|
| Air Mode | Yes |
| Input Channels | 2 |
| Output Channels | 2 |
| MIDI I/O | No |
| Connectivity | USB Type-C |
| Phantom Power | +48V (switchable) |
| Inputs | 2 x XLR/TRS combo |
| Outputs | 2 x TRS (1/4") |
| Dynamic Range | 120dB |
| Type | Audio Interface |
| USB | USB 2.0 |
| Monitor Outputs | 2 x TRS (1/4") |
| Software Included | Ableton Live Lite |
A step-by-step guide for setting up your Scarlett, registration, and accessing software.
Steps to download and install Focusrite Control 2 software on Windows and Mac.
Explains how to adjust input gain levels for optimal recording quality.
Details on controlling preamp gain remotely using Focusrite Control 2 software.
Describes how input meters on the Scarlett 2i2 indicate signal levels.
Explanation of the 48V button for phantom power and its software control.
How the Inst button changes the 6.35mm input between line and instrument level.
How to use the Auto Gain feature to set optimal input levels automatically.
Instructions for using the Auto Gain feature within Focusrite Control 2.
How Clip Safe automatically adjusts gain to prevent clipping.
Description of Air Presence and Air Presence and Harmonic Drive modes.
Explanation of the Output control and its associated level meter.
How to use the Direct Monitor button for latency-free monitoring.
Adjusting the Direct Monitor mix balance between inputs and software playback.
Procedures for updating the Focusrite Control 2 software.
Instructions on how to update the Scarlett 2i2's firmware via Focusrite Control 2.
Guidance on where to find help for troubleshooting queries.
To Next Page