GET STARTED WITH SCARLETT Solo, 2i2 & 2i4
Thanks for choosing the Scarlett (2
nd
Gen.) as your audio interface.
For an in depth video tutorial, please go to focusrite.com/get-
started or see the quick step guide below...
Mac Users
1. Connect your Scarlett to your Mac using the included USB
cable
2. Go to "System Preferences" then "Sound" and select your
Scarlett Eg. "Scarlett 2i2" as the input and output device
3. You are now ready to use your Scarlett audio interface
(Please Note: You may need to select the Scarlett as your
interface within your music software preferences)
Windows Users
1. Please go to focusrite.com/register
2. Enter your serial number, found on the bottom of your hardware
3. Then, enter your PRODUCT BUNDLE CODE found on the
inside of the product box
4. Download and install the relevant audio drivers
5. Run the installer
6. Connect your Scarlett with the included USB cable
7. Go to "CONTROL PANEL" then "SOUND" and select your
Scarlett Eg. "Scarlett 2i2" as the playback and recording default
device
8. You are now ready to use your Scarlett audio interface
(Please Note: You may need to select the Scarlett as your
interface within your music software preferences)
DOWNLOADING THE INCLUDED SOFTWARE
To Next Page
Need help?
General
Weight and Dimensions
