Need help?Do you have a question about the Focusrite Saffire PRO 26 and is the answer not in the manual?
General| Audio Interface Type | FireWire |
|---|---|
| Number of Preamps | 4 |
| Phantom Power | Yes |
| Analog Outputs | 6 x TRS |
| Headphone Outputs | 2 |
| Bit Depth | 24-bit |
| Digital Inputs | ADAT, S/PDIF |
| Digital Outputs | ADAT, S/PDIF |
| MIDI I/O | Yes |
| FireWire | Yes (FireWire 400) |
Details compliance information and declaration procedures for the product.
Specifies system requirements for Apple Macintosh computers.
Specifies system requirements for Windows computers.
Details the input and output connections on the rear panel.
Guides on configuring audio setup within a Digital Audio Workstation.
Information on installing and using the included Ableton Live Lite software.
Demonstrates setting up for recording audio sources like mics and instruments.
Overview of the Saffire MixControl mixer interface.
Details of Saffire MixControl input channel controls.
Details of Saffire MixControl output channel controls.
Explains how to use the Loop Back feature for recording internal audio.
Allows quick selection of typical monitoring set-ups.
Displays and allows changing the current sample rate of the Saffire PRO 26.
Displays and allows changing the selected synchronization source.
Explains ADAT to SPDIF conversion and SPDIF AC3 mode settings.
Details how to open, save, and save mixes in Saffire MixControl.
Technical specifications for the microphone inputs.
Technical specifications for the line inputs.
Technical specifications for the instrument inputs.
Details MIDI I/O, Firewire port, and power specifications.
Describes headphone outputs and front panel indicators.
To Next Page