Focusrite Saffire PRO 26 - ANALOGUE and DIGITAL I;O; MIDI and Firewire Connectivity; Headphone Monitoring and Indicators; Troubleshooting

33
ANALOGUE OUTPUTS
• Line level 6 x ¼” TRS jacks (Outputs 1 to 6)
• Nominal output level: 0 dBFS = 16 dBu, balanced
• Frequency Response: 20 Hz to 20 kHz +/- 0.7dB
• THD+N: <0.0010% (-95 dB) (measured with -1 dBFS input, 20 kHz bandwidth)
• Hardware and Software controlled Digital Volume control for all outputs (assignable in software)
• Hardware and Software controlled Digital Dim and Mute controls for all outputs (assignable in software)
• All outputs are usable as monitor outputs
DIGITAL I/O
• S/PDIF input (Chs 7 & 8) and output (Outputs 7 & 8): RCA phono on rear panel, 24-bit, 44.1 - 96 kHz.
Output transformer isolated
• ADAT Input (Chs. 11 to 18): 8 channels (44.1/48 kHz), 4 channels S-MUX (88.2/96 kHz)
MIDI I/O
• Input and output (5-pin DIN) on rear panel
FIREWIRE
• 1 x S400 port
POWER
• 12 V DC. External AC adaptor supplied
HEADPHONE MONITORING
• 2 x ¼” TRS jacks on front panel
• Output level: 13.2 dBu into 150 ohms
FRONT PANEL INDICATORS
• Metering of analogue inputs (1-6); 5 segment, 3-colour bargraphs (-42, -18, -6, -3 and 0 dBFS).
• Lock status LED
• FireWire Active LED
• Monitor MUTE switch and LED
• Monitor DIM switch and LED
• 2 x 48 V switches and LEDs
• 2 x Instrument switches and LEDs
• 2 x Pad switches and LEDs
• Power switch and LED
Troubleshooting
For all troubleshooting queries, please visit the Focusrite Answerbase where there are articles covering numerous troubleshooting
examples: www.focusrite.com/answerbase.