MAKE A FOODSAVER
®
BAG:
1. Move Easy Lock Latch
to open position. Open
appliance lid and place
roll into roll holder.
2. Lift up Roll Cutter Bar
and place bag material
beneath the cutter bar.
Pull out enough bag
material to hold item
being vacuum sealed,
plus 3 inches (7.62 cm).
Lower the Roll Cutter
Bar and slide Bag Cutter
across Cutter Bar.
3. Insert one end of bag
material across sealing
strip.
4. Close lid and turn Easy Lock Latch to Operate
position.
5. Press Seal button.
6. When Seal Indicator Light turns off, sealing is
complete. Turn latch to Open position, lift lid and
remove bag.
HOW TO:
FM2900 SERIES QUICK START GUIDE Español
p. 3
Français
p. 2
VACUUM SEAL FOODSAVER
®
ZIPPER BAGS:
1. Prepare zipper bags
according to FoodSaver
®
Accessory Guidelines,
which are included with
accessory purchases. For
zipper bags, make sure
not to put any food under
the valve and press zipper
closed with nger while bag is lying down on a at
surface.
2. Close lid and turn Easy Lock Latch to Operate
position.
3. Insert one end of the Accessory Hose into Accessory
Port on Appliance until it clicks into place. Place
Handheld Sealer on zipper bag valve.
4. Press Mode Button until the Indicator Light next to
Dry is illuminated. Then press Vacuum Button.
Zipper bags are safe for pantry and fridge use only.
VACUUM SEAL A FOODSAVER
®
BAG:
1. Place item(s) in bag,
allowing at least three
inches (7.62 cm) of space
between bag contents
and top of bag.
2. Open appliance lid and
place open end of bag
into Vacuum Channel
(Drip Tray).
3. Close lid and turn Easy
Lock Latch to Operate
position.
4. Press Vacuum button
to begin vacuum and
sealing process. Motor will
continue to run until bag
is fully vacuumed, then will
automatically seal.
5. When Seal Indicator Light turns off, turn Latch to Open
position, lift lid and remove bag. Refrigerate, freeze or
store as needed.
VACUUM SEAL FOODSAVER
®
CONTAINERS:
(sold separately)
1. Prepare FoodSaver
®
Preserve & Marinate
Container according to
Guidelines, which are
included with container
purchase.
2. Close lid and turn Easy
Lock Latch to Operate
position.
3. Insert one end of
Accessory Hose into Accessory Port on Appliance. Place
Handheld Sealer on container valve.
4. Press Mode Button until the Indicator Light next to Dry
is illuminated. Then press Vacuum Button.
To release vacuum and open, turn knob on lid to Open.
Place Bag on Sealing Strip
Place Roll into Roll Holder
Place Bag in Drip Tray
Press Vacuum Button
See Owner's Manual for full instructions and safeguards.
FM2900_22EFSQSG1 (digital) QSG_GCDS-JC PKG0001302054
FM2900_22EFSQSG1 (digital) QSG.indd 1FM2900_22EFSQSG1 (digital) QSG.indd 1 2022/2/22 上午9:372022/2/22 上午9:37
To Next Page
Need help?
General
