FoodSaver Handheld Sealer

To Next Page

To Open and Release Vacuum: Turn the valve to the Marinate/Open

position and use easy open tabs to open and enjoy!

Note: If your appliance does not have “Marinate Mode”, marinate food

by following steps in “how to vacuum seal” section above. Follow steps 1 - 3, wait

12 minutes for food to marinate, then release vacuum.

P.N. 2029671

STEP 1

Turn valve so the arrow

points to the Marinate/

Open position.

STEP 2

Remove liquid reservoir

and connect built-in

Handheld Sealer.

HOW TO VACUUM SEAL

HOW TO MARINATE WITH MARINATE MODE

STEP 3

Press ‘Marinate’ button on

appliance to start marinating

cycle to infuse flavor in

12 Minutes!

PRESERVE & MARINATE CONTAINERS

QUICK START GUIDE

STEP 1

Turn valve so the arrow

points to the Vacuum/

Store position.

STEP 2

Connect Handheld Sealer or

Handheld Accessory by

placing on top of the valve.

STEP 3

To vacuum and remove air,

press vacuum or accessory

button according to the

appliance instructions. Once

complete, store container in

the freezer, fridge, or pantry.

Need help?

Do you have a question about the FoodSaver Handheld Sealer and is the answer not in the manual?

Summary

How to Vacuum Seal

Step 1: Turn Valve to Vacuum;Store Position

Turn valve so the arrow points to the Vacuum/Store position.

Step 2: Connect Handheld Sealer

Connect Handheld Sealer or Accessory by placing on top of the valve.

Step 3: Vacuum and Remove Air

Press vacuum or accessory button to remove air; store container.

How to Marinate with Marinate Mode

Step 1: Turn Valve to Marinate;Open Position

Turn valve so the arrow points to the Marinate/Open position.

Step 2: Remove Reservoir and Connect Sealer

Remove liquid reservoir and connect built-in Handheld Sealer.

Step 3: Start Marinating Cycle

Press 'Marinate' button to start marinating cycle for 12 minutes.

Guarantee Information