FOR-A HVS-492OU - User Manual

HVS-490
Digital Video Switcher
HVS-492OU
HVS-492WOU
HVS-492ROU
Operation Unit
4
th
Edition - Rev. 1
OPERATION
MANUAL

Summary

Precautions and Safety Warnings

Power Supply Safety

Guidelines for safe operation regarding power connections and usage.

Grounding Safety

Ensuring proper grounding to prevent electrical hazards.

Operation Safety

Precautions for safe operation under various atmospheric and environmental conditions.

Transportation Safety

Handling guidelines to prevent malfunction during transit.

Circuitry Access and Hazards

Warnings related to accessing internal circuitry and potential electrical hazards.

Potential Hazards and Warnings

Actions to take in case of abnormal odors/noises and potential hazards.

Rack Mount, Ground, and Feet Guidelines

Instructions for rack mounting, grounding, and installing rubber feet.

Consumable Items Information

Details on periodic replacement of consumable items.

Initial System Setup and Operation

Connection and Basic Operation Guide

Powering On the System

Selecting System Signal Format

Verifying Current Status

Switcher System Configuration

Network Settings

Factory Default IP Addresses

Setting up Video Sources

Adjusting Input Signal Levels

Mapping Video Sources to Bus Buttons

Using Shift Levels for Bus Buttons

Changing Video Source Names

Frame Synchronizer and XPT DELAY

UTILITY1-2 Bus Setup

Matte Color and Gradient Image Setup

Side Panel Image and Resize Function

Setting up Additional Inputs

HVS-100 DI-A SDI Input Card Configuration

HVS-100 AI Analog Input Card Configuration

HVS-100 PCI HDMI;VGA Input Card Configuration

HVS-100 DO SDI Output Card Configuration

HVS-100 AO Analog Output Card Configuration

HVS-100 PCO HDMI;VGA Output Card Configuration

HVS-49 IO HD-SDI;HDMI Input;Output Card

HVS-49 AES Audio Input;Output Card

Video Outputs and Signal Selection

Selecting Video for M;E OUT 1-2 Ports

PREVIEW, CLEAN 1, and CLEAN 2 Image Outputs

KEY OUT Signals Configuration

Changing AUX Output Images (AUX Transitions)

HDMI Output Configuration

Adjusting Output Signal Levels

Safety Area Markers Display

Ancillary Data Handling

BUS LINK and TRANS LINK Functions

Transitions and Effects

Transition Blocks Overview

Description of LINE 1 and LINE 2 transition blocks.

Black Transitions

Procedure for executing and disabling black transitions.

Background Transitions

Performing CUT, MIX, and Pattern transitions for backgrounds.

KEY Transitions

Performing CUT, MIX, and Pattern transitions for keys.

Simultaneous BKGD and Key Transitions

Performing background and key transitions simultaneously.

Simultaneous Transition of M;Es (ONStage)

Performing transitions across multiple M/E buses simultaneously.

Pattern (WIPE;DVE) Transitions

Applying WIPE and DVE patterns for transitions.

Direct Pattern Function

Saving, recalling, and clearing direct patterns.

Modifying Patterns (WIPE and DVE)

Changing or modifying preset WIPE and DVE patterns.

Resetting Modified Patterns

Resetting subsets or all modified pattern data.

KEY IN;OUT Using Cut or Fade

Controlling key signal insertion and removal via AUTO/ON AIR buttons.

AUX Image Transitions

Applying fade and slide effects to AUX bus images.

Advanced Transition Settings

Adjusting transition rate, fader limit, and other advanced settings.

KEY and FLEXaKEY Features

Key Types Overview

Description of Luminance, Full, Bus, and Chroma key types.

Creating Luminance and Full Keys

Steps for creating Luminance and Full key effects.

Creating Bus Keys

Procedure for creating bus keys using insert and source signals.

Key Link Functionality

Automating source selection for paired key signals.

Key Quick Recall (KEY SET: INPUT)

Recalling key setups based on input signals.

Adjusting Key Signal Parameters

Fine-tuning key gain, clip, transparency, and FAM settings.

Chroma Key Setup and Adjustments

Creating and adjusting chroma keys, including sample buffers.

Masking Chromakeys

Applying box masks to define keyed areas.

Resetting Chromakey Channels

Procedure for resetting chromakey channel settings.

Mask and Invert Functions

Using mask and invert functions for key signals.

Key Edge Adjustments

Adding border-type edges to key signals.

FLEXaKEY1-4 Configuration

Creating and assigning FLEXaKEYs.

Changing Key Layer Order

Modifying the layering order of keys and FLEXaKEYs.

Assigning DVE Channels and Effects

Pattern Transitions with DVE Types

Assigning DVE Channels to Buses (LINE DVE)

DVE Channel Status Indication

DVE Effects Overview

Changing Position and Size of DVE Images

DVE Rotation and Crop Functions

DVE Size(X, Y) and FADE Settings

DVE Border Settings

Color Correction Features

Assigning a Color Correction Channel

Adjusting Colors and Modes

Clip Adjustment for Signal Levels

Resetting a Color Corrector Channel

Still and Clip Store Management

Still Images (STILL) Management

Video Clips (CLIP) Management

CG WIPE Effects

Still Image Display Using FS Buffer (INPUT STILL)

Storing Still and Video Images (HVS-49 SSD240 G)

Event Memory Management

Storing Panel Settings as Events

Procedure for saving panel settings into event memory.

Recalling Events from Memory

Methods for recalling stored events using DIRECT or RECALL.

Transitions Using Event Recall

Performing smooth transitions by loading events with specified durations.

Overwrite Protection and Event Deletion

Managing event data by setting overwrite protection and deleting events.

User Default Setting and Startup Events

Setting user defaults and loading events at switcher startup.

Sequence Function Operations

Basic Sequence Operations

Editing Sequences (Adding, Replacing, Copying, Deleting)

Sequence Group Operation

SEQUENCE Memory Operation

Deleting Sequence Memory Data

Macro Operations

Recording and Executing Macros

Steps for recording and playing back macros.

Macro Memory Management

Managing macros: overwrite protection, naming, and deletion.

Copying, Moving, and Exchanging Macros

Procedures for copying, moving, and swapping macro data.

Macro Play Channel Selection

Selecting channels for simultaneous macro execution.

Macro Execution Buttons

Assigning and executing macros using bus buttons.

Macro Attach and Detach

Attaching and removing macros from buttons.

File Operations

Notes on SD Cards

Setting and Image File Types

Saving Data to SD Card

Loading Data from SD Card

Editing Data in SD Card

Sending;Receiving Data to;from PC

External Device Connections and Control

GPI Control Functions

Configuring GPI inputs and outputs.

Tally Output Settings

Configuring tally colors and output settings.

Router Control via RS-422 or LAN

Connecting and controlling routers using RS-422 or LAN interfaces.

MFR-TALM Connection for Tally and Titles

Connecting MFR router and TSL tally manager.

TSL UMD Protocol for Signal Names

Receiving and sending signal names using TSL UMD protocol.

AUX Bus Control Box Integration

Connecting and configuring AUX bus control boxes.

Editor Control via RS-422

Controlling the switcher from an editor via RS-422 interface.

VTR Control via RS-422

VDCP Operation and Connection

4 K (UHD) Mode Operations

4 K Input; Output Ports and Assignment

Switching to 4 K Mode

4 K Mode Specifications

Payload ID (3 G-SDI (2 SI)) for 4 K Signals

FOR-A HVS-492OU Specifications

General

Brand	FOR-A
Model	HVS-492OU
Category	Switch
Language	English