How to troubleshoot no image output on FOR-A MFR-3100EX Switch?
If there's no image output from your FOR-A Switch, first ensure video signals are input to the video input connectors. Verify that all cables are properly connected for the signal inputs. Check that the I/O cards are installed in the correct slots, and confirm that the crosspoint is set properly.
What to do if unable to control FOR-A MFR-3100EX using the remote control panel?
If you're unable to control the FOR-A Switch using the remote control panel, begin by ensuring the LAN cable is properly connected. Next, check the RU Info page in the Web-based Control. If any item, except Voltage, is indicated as NG, investigate that item. If the Voltage is indicated as NG, contact your FOR-A agent.
How to fix FOR-A Switch when there is no image output?
If you're experiencing no image output on your FOR-A Switch, first ensure that video signals are being input to the video input connectors. Check that the cables are correctly connected for the signal inputs. Finally, verify that the crosspoint is set properly.
To Next Page
General
