EN-9
Troubleshooting
1. If no display appears after pressing :
POSSIBLE CAUSE WHAT TO DO
Batteries exhausted. Replace the batteries.
Batteries incorrectly
installed or absent.
Check if the batteries are correctly
installed.
2. If the heart rate is higher/lower than user’s average:
POSSIBLE CAUSE WHAT TO DO
Movement during
measurement.
Repeat the measurement.
Batteries incorrectly
installed or absent.
Rest at least 30 minutes before
repeating the measurement.
3. If the result is higher/lower than the user’s average
measurement:
POSSIBLE CAUSE WHAT TO DO
User may not be in the
correct position while
measuring.
Adjust to the correct position for
measurement.
Blood pressure naturally
varies from time to time.
Keep in mind for the next
measurement.
SYSTEM TROUBLESHOOTING
If you follow the recommended action but the problem
persists, or error messages other than the ones below appear,
please call your local customer service. Do not attempt to
repair by yourself and never try to disassemble the monitor
under any circumstances.
Error Messages
MESSAGE CAUSE WHAT TO DO
E-1
Ination or
pressure error.
Please contact local
customer service for help.
E-4
Blood pressure
measurement error.
Ret cu tightly and
correctly.
Relax and repeat the
measurement. If error still
remains, contact local
customer service for help.
E-b Batteries are dead. Replace the batteries.
E-A
Problems with the
meter.
Review the instructions and
repeat the test. If the meter
still does not work, please
contact the local customer
service for help.
E-E