EN-10
4. If the cu inates again while measuring:
POSSIBLE CAUSE WHAT TO DO
Cu is not fastened. Fasten the cu again.
If user’s blood pressure is higher than the pressure the device has
inated, the device will automatically increase the pressure and
start to inate again. Stay relaxed and wait for the measurement.
SYMBOL INFORMATION
Symbol Referent Symbol Referent
Consult instructions
for use
Storage / transport
temperature limitation
Type BF applied part CE Mark
Storage / transport
humidity limitation
Manufacturer
Medical device Battery
Serial number Model No.
Authorised
representative in the
European Union
Ingress protection
rating
Dispose of or recycle
the electrical wastes
according to local
regulations
Caution, consult
accompanying
documents
SPECIFICATIONS
System performance
Power source: Four 1.5V AA alkaline batteries
Size of monitor w/o cu: 130.5 mm (L) x 90 mm (W) x 55 mm
(H), 210 g without batteries.
Cu Size: 24-43 cm (9.4-16.9 inches) with air tube 100 cm
Memory: Maximum 100 memory records
Power saving: Automatic power o if system idle for 3
minutes
System operating conditions: 5°C to 40°C (41°F to 104°F),
between 15% - 93% RH
Meter storage conditions: -25°C to 70°C (-13°F to 158°F),
between 10% - 95% RH
Power Supply Input: four (4)1.5V AA size alkaline batteries
DC +6V / 1A (max) via Power Plug
To Next Page
Loading...
