44/65
Q14: What will happen if insufficient blood is applied on the test strip? What do I do?
If insufficient blood is applied on the test strip, there will be an error beep and an error
code will be displayed on the meter screen (please refer to the owner’s manual and
check the error message.)
Please review the instructions and repeat the test with a new test strip.
Q15: Why would it be possible to obtain different results from the same sample of
blood using the same glucometer?
The most common reasons for the discrepancies could be:
(1) Test strip problems:
A. Test strip expired
B. Test strip contaminated or damaged
C. Wrong code between test strip and meter
D. Not enough blood applied to the test strip
(2) Meter problems:
A. The meter is damaged caused by improper handling or there is a blood clot
inside it.
B. Wrong code between test strip and meter
C. Unknown electronic elements defect
(3) Blood sample obtaining surface is dirty:
A. Alcohol, dirt or other substances on your skin (please wash your hand before
you doing the test).
(4) Improper blood obtaining way:
A. If the fingertip is excessively squeezed, too much tissue fluid will be present
in the blood samples and get the wrong measuring value (We highly
To Next Page
Loading...
