Need help?Do you have a question about the ForaCare FORA D40 and is the answer not in the manual?
General| Sample Type | Capillary whole blood |
|---|---|
| Measuring Time | 5 seconds |
| Power Source | 2 x AAA batteries |
| Battery Life | Approximately 1000 tests |
| Operating Temperature | 10-40°C (50-104°F) |
| Hematocrit Range | 30-55% |
| Wireless Communication | Bluetooth |
| Display | LCD |
| Measurement Range | 20-600 mg/dL |
| Sample Volume | 0.5 μL |
| Operating Humidity | 85% relative humidity or below |
| Intended Use | For self-testing of blood glucose and uric acid levels |
Lists essential safety precautions for using the device, including intended use and avoiding hazards.
Highlights critical warnings and precautions related to the device's operation and user safety.
Explains how to use control solutions to ensure monitor and strip accuracy.
Step-by-step guide on how to conduct a control solution test.
Instructions on preparing the lancing device for blood sampling.
Details how to select test mode and apply blood to the test strip.
How to read results and safely dispose of used lancets.
Detailed instructions on how to properly position and secure the blood pressure cuff.
Guidance on sitting and positioning the arm correctly for accurate BP readings.
Step-by-step process for performing a blood pressure measurement and reading results.
Lists common error messages and provides troubleshooting steps for resolution.
Addresses common problems encountered during blood glucose testing and their solutions.
Explains what to do when control solution test results are out of the expected range.
Covers common problems during blood pressure measurement and how to resolve them.
To Next Page
