A1-32
Testing Your Blood Glucose
Be sure to read carefully this section and the test strip package insert found in
the test strip box before testing. Make sure you have all items needed to test:
the monitor, test strips, lancing device, and sterile lancet.
WASH AND DRY YOUR HANDS FIRST BEFORE STARTING.
STEP 1. Set the Lancing Device
Screw off the cap of the lancing device. Insert a
lancet into the lancet holder and push down
firmly until it is fully seated.
Twist the protective disk until it separates from
the lancet.
Replace the lancing device cap. Turn the cap
until it is snug but not too tight.
32
To Next Page
Loading...
