63/65
6. Pull the cocking control back until it clicks. You will see a color change inside the
release button when it is ready. (g)
Hold your fingers on the body NOT the cap. (*)
7. Lancing the finger: Press the lancing device’s tip firmly against the lower side of
your fingertip. Press the release button to prick your finger, then a click indicates
that the puncture is complete. (h)
8. Remove the device from the puncture site. After penetration, remove the first drop
of blood with a clean cotton swab. Gently squeeze the punctured area to obtain
another drop of blood. Be careful NOT to smear the blood sample. Apply the
blood to the test strip. (i)
To Next Page
Loading...
