5
Before using your monitor for the first time, or if you change the monitor
battery, you should check and update these settings. Make sure you
complete the steps below and have your desired settings saved.
Entering the Setting Mode
Start with the monitor off. Press and
hold AVG/S button until the monitor
turns on.
1. Setting the date
With the year flashing, press M button
until the correct year appears. Press
AVG/S.
With the month flashing, press M button
until the correct month appears. Press
AVG/S.
With the day flashing, press M button
until the correct day appears. Press
AVG/S.
2. Setting the time
With the hour flashing, press M button
until the correct hour appears. Press
AVG/S.
With the minute flashing, press M
button until the correct minute appears.
Press AVG/S.
Setting the Monitor
To Next Page
Loading...
