28
Performing a Blood Glucose Test
Step 1
Insert the test strip to turn on the meter.
Wait for the meter to display the test strip
“
”
and blood drop
“
”
symbol.
Step 2
Select the appropriate measuring mode by pressing
.
For selecting the measuring mode, please refer to the
“
FOUR
MEASURING MODES
”
section on page 17.
Step 3
Obtaining a blood sample.
Use the pre-set lancing device to puncture the
desired site. After penetration, discard the first drop
of blood with a clean cotton swab. Gently squeeze
the punctured area to obtain another drop of blood.
Be careful NOT to smear the blood sample.
The volume of blood sample must be at least 0.5
microliter (
μ
L) of volume. ( actual size).
To Next Page
Loading...
