30
Step 5
Read your result.
The result of your blood glucose test will appear
after the meter counts down to 0. This blood glucose
result will automatically be stored in the memory.
Step 6
Eject the used test strip and remove the lancet.
To eject the test strip, point the strip at a disposal
container for sharp items. The meter will switch
itself off automatically after the test strip is
ejected.
Step 7
Always follow the instructions in the lancing device insert when
removing the lancet.
WARNING!
The used lancet and test strip may be biohazards. Please discard them
carefully according to your local regulations.
To Next Page
Loading...
