27
Step 5
Read the result
The result of your blood glucose test will appear
after the meter counts down to 0. This blood
glucose result will automatically be stored in the
memory.
Step 6
Eject the used test strip
To eject the test strip, point the strip into a
disposal container for contaminated items.
Slide the Test Strip Ejector forward. The meter
will automatically turn itself off after the test
strip is ejected.
Always follow the instructions in the lancing device insert when
removing the lancet.
WARNING
The used lancet and test strip may be biohazards. Please discard them
carefully according to your local regulations.
Wash your hands thoroughly with soap and water after handling the meter,
lancing device and test strips to avoid contamination. For more information,
please refer to the “Cleaning and Disinfection” section.
To Next Page
Loading...
