13
Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete the steps below and have your desired settings saved.
► Entering the Setting Mode
Start with the meter off (no test strip
inserted). Press SET to turn on the meter.
Step 1
Setting the date
With the year flashing, press
until the
correct year appears. Press SET button.
With the month flashing, press
until the
correct month appears. Press SET button.
With the day flashing, press
until the
correct day appears. Press SET button.
Setting the Meter
To Next Page
Loading...
