EasyManua.ls Logo

ForaCare GD40 - Meter Care Procedures; Cleaning and Disinfection Procedure

ForaCare GD40
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Caring for Your Meter
To avoid the meter and test strips attracting dirt, dust or other con-
taminants, please wash and dry your hands thoroughly before use.
► Why the cleaning and disinfection should be performed
Cleaning and disinfection are different. Cleaning is the process of re-
moving dirt (e.g. food debris, grease, dust), disinfection is the process
of killing germs (e.g. bacteria and viruses).
► When to clean and disinfect the meter
Clean the meter when you see any dirt on it. You sho
uld disinfect the
meter at least once a week to prevent infection.
► How to clean and disinfect the meter
The meter must be cleaned prior to the disinfection. Use one disin-
fecting wipe to clean exposed surfaces of the meter thoroughly and
remove any visible dirt or blood or any other body uid with the wipe.
Use a second wipe to disinfect the meter. Do NOT use organic solvents
to clean the meter.
We recommend for meter cleaning and disin
fection you should use the
disinfecting wipes/towelettes from below. The following product with
isopropyl alcohol as the active ingredient has been shown to be safe
for use with the ForaCare GD40 Blood Glucose Monitoring System.

Table of Contents

Related product manuals