12
4. Deleting the memory
With “dEL” and a flashing “ ” on the
display, press Main button and select “no”
to keep the results in memory then press
SET to skip.
To delete all the results, press Main
button and “yes” and “ ” are displayed
on the meter, press SET to delete the
memory.
If you do not want to delete the results, do
not press the Main button but press the
SET button again to turn off the meter.
5. Set the reminder alarm
You may set up any or all of the reminder
alarms (1-4). The meter displays “On” or
“OFF” and “
”, press Main button to
turn on or turn off to set the first reminder
alarm.
Press Main button to select “On”, then
press SET to set the hour. When the hour
is flashing, press Main button to add
an hour. Press SET to confirm and go to
minutes, press Main button to add one
minute. Hold Main button longer to add
To Next Page
Loading...
