A) Attach one end of the butterfly Cable (76#)to the hook on the right butterfly(8#).
Place one pc Pulley (60#) under the cable, and position the pulley into the
Swivel Pulley bracket(19#),and secure them with one pc M10*45 Allen
bolt(104#),two pcsφ10 washer(100#),one M10 Aircraft Nut(97#).
B) Draw the Butterfly Cable (76#)downwards, place one pc pulley (60#) onto the
cable and secure the pulley to the Cross double floating pulley bracket
(18#)with one pc M10*45 Allen bolt(104#),two pcs φ 10 washer(100#),one M10
Aircraft Nut(97#).
Note: let the pulley assembly hanging at this stage.
C) Draw the cable upwards around the pulley. Repeat the Procedure B to install
the pulley to left side swivel pulley bracket.
D) Attach another end of the butterfly cable (76#) to the hook on the left butterfly.
To Next Page
Loading...
