ForceDoor BASE 35 - Page 12

10
[Press UP to (1.-)]
MENU 1 Common Function Setting
Wired Push Button Mode Setting
 Press and hold SET button for
about 6 seconds to enter main
menu until “0.-” appears on the
display then release the button.
 Press UP till “1.-” appears on the
display, press SET to enter
common function setting menu.
 After press the SET button on
“ 1.- ” , “ 1.0 ” appears on the
display
 Press SET to enter the control
panel button mode setting.
Execution means:
Long press to open the door,
long press to close the door
Execution means:
Click to open the door,
Long press to close the door
Execution means:
Long press to open the door,
Click to close the door
Execution means:
Click to open the door,
Click to close the door (default)
Remark:
 When the emergency stop
function works, Function
is executed as default button
[Press ‘SET’ to (1.0)]