ProCal 3
Instructions
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS.
Questions? http://bit.ly/1KdPDjy or (800) FORD788
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
Page 8 of 14
Causes of all existing trouble codes must be resolved prior to proceeding with installation of your
performance calibration. Write down or copy and paste displayed codes and contact the Ford
Performance Techline at 1-800-367-3788 for assistance with resolution of existing trouble codes before
continuing.
STEP 7: Resolve causes of all existing trouble codes then clear DTCs by clicking the “Clear DTCs” button on the
“Diagnostics” tab.
STEP 8: Click “Read DTCs” again to verify all issues have been resolved.
To Next Page
Loading...
