Seating
and safety restraints
94
6. Within seven seconds of the
warning light turning
off, buckle then unbuckle the safety
belt.
• This will disable Belt Minder if it
is currently enabled, or enable Belt
Minder if it is currently disabled.
7. Confirmation of disabling Belt
Minder is provided by flashing the
light four times per
second for three seconds.
8. Confirmation of enabling Belt
Minder is provided by flashing the
light four times per
second for three seconds, followed
by three seconds with the
light off, then followed by
flashing the light four
times per second for three seconds
again.
9. After receiving confirmation, the
deactivation/activation procedure is
complete.
To Next Page
Loading...
