2. Turn the engine off and wait a few minutes for the oil to drain into the
oil pan.
3. Set the parking brake and ensure the gearshift is securely latched in P
(automatic transaxle) or 1st (manual transaxle).
4. Open the hood. Protect yourself from engine heat.
5. Locate and carefully remove the engine oil indicator (dipstick).
• 2.0L SPI/2.3L I4engine
• 2.0L Zetec engine
6. Wipe the indicator clean. Insert the indicator fully, then remove it
again.
• If the oil level is between the MIN and MAX marks (2.0L SPI/2.3
engine) or between ADD and FULL (2.0L Zetec engine), the oil
level is acceptable. DO NOT ADD OIL.
• 2.0L SPI
Maintenance and Specifications
167
To Next Page
Loading...
