Fold the seats back down until they
engage.
Raise the seatbacks. See Folding the
seatbacks up.
Install the rear seatbelts in the belt guides
on the outboard seatbacks.
Removing the seats
WARNING
The rear seats are heavy. To avoid
injury, take care when lifting the
seats.
Note:
To increase the space in the
luggage compartment, the rear seats can
be removed completely.
1.
Fold the seat forward. See Folding
the seats forward.
3. Push down both red levers to open
the locking mechanism.
4. Remove the seat.
Installing the seats
WARNINGS
To avoid injury, take care when
folding the seats down.
Make sure that the locking hole on
the floor is clear of sand, rock or any
objects which may prevent the seat
from locking.
Note:
Make sure the locking mechanism
is fully open.
117
Seats
To Next Page
Loading...
Need help?
General
