Run the tip of your fingers over the edge
of the blade to check for roughness.
Clean the wiper blade lips with water
applied with a soft sponge.
CHANGING THE WIPER
BLADES
Windscreen wiper blades
CAUTIONS
Set the windscreen wipers in the
service position to change the wiper
blades.
You can use the service position in
winter to provide easier access to
the wiper blades for freeing them
from snow and ice. The windscreen
wipers will return to their normal position
as soon as you switch on the ignition so
make sure that the outside of the
windscreen is free from snow and ice
before you switch on the ignition.
Note:
The windscreen wiper blades are
different in length. See Technical
specifications (page 57). If you install
wiper blades of the wrong length, the rain
sensor may not work correctly.
Service position
Switch off the ignition and move the wiper
lever to position A within three seconds.
Release the lever when the windscreen
wipers have moved to the service
position.
Changing the windscreen wiper
blades
Set the windscreen wipers in the service
position and lift the wiper arms.
56
Wipers and washers
To Next Page
Loading...
