Small arrow-shaped marks on the sills A
show the location of the jacking points.
Assembling the wheel brace
Type one
WARNING
When returning the wheel brace
extension to its original position, take
care not to get your fingers caught.
Note:
Make sure that the wheel brace is
fully extended.
Extend the wheel brace.
Type two
CAUTION
The screw-in towing eye has a
left-hand thread. Turn it
anti-clockwise to install it. Make sure
that the towing eye is fully tightened.
Insert the screw-in towing eye into the
wheel brace.
203
Wheels and tyres
To Next Page
Loading...
