Note:
If TA is on and you select a preset
or manual tune to a non TA station no
traffic announcement will be heard.
Note:
When you are listening to a non
TA station and turn TA off and on again a
TP seek will occur.
Traffic announcement volume
Traffic announcements interrupt normal
broadcasts at a preset minimum level that
is usually louder than normal listening
volumes.
To adjust the preset volume:
•
Use the volume control to make the
necessary adjustment during an
incoming TA broadcast. The display
will show the level selected.
Ending traffic announcements
The audio unit will return to normal
operation at the end of each traffic
announcement. To end the
announcement prematurely, press TA or
TRAFFIC during the announcement.
Note:
If you press TA or TRAFFIC at any
other time it will switch all announcements
off.
232
Audio unit operation
To Next Page
Loading...
Need help?
General
