Remote control with a folding
key blade
1. Insert a screwdriver in the position
shown and gently push the clip.
2. Press the clip down to release the
battery cover.
3. Carefully remove the cover.
4. Turn the remote control over to
remove the battery.
5. Install a new battery (3V CR 2032) with
the + facing upwards.
6. Replace the battery cover.
Remote control without a
folding key blade
1. Press and hold the pushbuttons on
the edges to release the cover.
Carefully remove the cover.
2. Remove the key blade.
3. Twist a flat bladed screwdriver in the
position shown to separate the two
halves of the remote control.
37
Keys and remote controls
To Next Page
Loading...
