Ford 3930 - Front Axle Hub Oil Levels; Grease Fittings and Pivots

------------_... ...... ..._,, SECTION B
50 HOUR SERVICE (continued)
0
A117
1g. Front AD Hub 011 (four wheel drive only)
1. LeveJ/filler plug
2. Level line
19. Front Axle Hub Oil Levels (four wheel
drive
only)
Position
the left-hand front wheel with the oil
level
line horizontal, as shown in Figure 19. En-
sure that the oil reaches the combined level/filler
plug.
If necessary, top up through the opening with
clean oil.
Repeat on the right-hand wheel.
See Section C for correct oil grade.
20/29. Grease Fittings and Pivots
Oil all pivots and apply a grease gun to the lubrica-
tion fillings, as shown in Figures 20 to 29 inclu-
sive:
A56
11
20. Drive Shaft Front Bearing and Rear Trunnion Pin
(four wheel drive only)
(Cover removed for clarity).
A41
11
21. Drive Shaft Centre Bearing (four wheel drive only)
(Cover removed for clarity).
There is
also a fitting on the rear of the drive shaft.
22. Front Trunnion Pin (four wheel drive)
11