SECURITY CODE
The system incorporates a unique
Keycode that must be entered
before the unit will operate. Normally,
the dealer does this during the
pre-delivery inspection.
If the battery is disconnected for any
reason, or the unit is removed from
the vehicle, the Keycode must be
re-entered before the unit will work
again.
LOST SECURITY CODE
If you lose the Keycode, contact your
dealer and supply details of your unit
along with some proof of identity.
Your dealer will then obtain the
correct code for you.
ENTERING A SECURITY
CODE
If CODE - - - -, CODE 0000,
SAFE or ENTER KEYCODE
appears in the display when you
switch on the unit, you must enter
the Keycode using the on screen
instructions.
Use the number buttons to enter the
correct code. Press the button below
OK to confirm the entry.
INCORRECT SECURITY
CODE
CAUTION
Make sure that you have entered
the correct Keycode before
confirming the entry. Repeated
incorrect entries may cause a
permanent lock of the unit.
Up to three Keycode entry attempts
are allowed before the unit will lock
for one hour.
18
Navigation system security
To Next Page
Loading...
Need help?
General
