Removing a Wheel Trim
The wheel trim fitted to your wheel is
retained by three of the lug nuts. The fourth
lug nut passes through the larger of the
holes and holds the wheel in position.This
allows you to remove the trim without the
need to raise your vehicle.
1. Remove the three lug nuts as shown.
2. Remove the wheel trim.
Note: Do not loosen the lug nut diagonally
opposite to the valve stem.
Installing a Wheel Trim
WARNING
Make sure there is no grease or oil on
the threads or the surface between
the wheel lugs and nuts. This can
cause the lug nuts to loosen while driving.
1. Install in the reverse order.
Note: Tighten the lug nuts to 133 Nm.
Removing a Road Wheel
WARNINGS
Park your vehicle in such a position
that neither the traffic nor you are
hindered or endangered.
Set up a warning triangle.
150
EcoSport (CBY) Haiduong (Vietnam)/Rayong (Thailand), DN15-19A321-GC enPHI
Wheels and Tires